Need pricing? We will match or beat competitor prices - please contact us if you have items that we can review!

0 CART
items in your cartto quote
Ooops no items were found.
Try something else.
Ok
Loading…
To cart
Quote Me
0
Own Brand

Kukko Narrow 2-Arm Revers Quick Adj 5.5-Ton Capacity 6-3/8""(160mm) Open 5-7/8""(150mm) Reach

Category Pullers & Separators
B2688819
Own Brand

Kukko Narrow 2-Arm Revers Quick Adj 5.5-Ton Capacity 6-3/8""(160mm) Open 5-7/8""(150mm) Reach

Delivery 1-3 Days
Item Code: B2688819
Category Pullers & Separators
Manufacturer KUKKO QUALITY TOOLS INC

Description

FOR REMOVING BEARINGS GEARS DISCS ETC. FOR TIGHT OR DIFFICULT-TO-ACCESS SPACES. UL STYLE""MARGIN-TOP0PX; PADDING-TOP 5PX; PADDING-BOTTOM 5PX;"" THE THIN PULLING HOOKS ARE SUITABLE FOR NARROW DIFFICULT-TO-ACCESS LOCATIONS. A MANUAL ADJUSTMENT KNURL ALLOWS RAPID LOOSENING AND ADJUSTING OF THE EXTRACTOR JAWS ON THE CROSS-BEAM WITHOUT USING A WRENCH. CAN BE INSTALLED ON VARIOUS PULLING HOOKS AND VARIABLE REACH THANKS TO JAW EXTENSIONS. TURNING THE PULLING HOOKS ENABLES THEM TO BE USED BOTH INTERNALLY AND EXTERNALLY. SUITABLE FOR PULLING ASYMMETRIC WORKPIECES. SPINDLE HEAD BAND PREVENTS THE WRENCH FROM SLIPPING OFF. CROSS-BEAM WITH HEXAGONAL PROFILE FOR GOOD GRIP. ALMOST ALL COMPONENTS AVAILABLE AS REPLACEMENT PARTS TIME-SAVING ORDER PROCESS THANKS TO NUMBERING SYSTEM. NOTE PRESSURE PADS FROM SERIES 600-17 ARE A GOOD ADDITION IF THE SHAFT IS HOLLOW AND THE SPINDLE CANNOT BE SUPPORTED. STABILITY SUPPORT FROM OPTIONAL SERIES 219 CLAMP. THIN PULLING HOOK WITH QUICK ADJUSTING CAPABILITY QUICK ADJUST. PARALLEL PULLING HOOKS IN EVERY POSITION EVEN WITH FULL LOAD. PULLING HOOKS WITH INFINITELY VARIABLE ADJUSTMENT ON THE CROSS-BEAM. OPTIMAL ADJUSTMENT OF THE SPINDLE TO THE SHAFT WITH 2-SIDED SPINDLE TIP (BALL AND TIP). MECHANICAL PRESSURE SCREW. MILLED THREAD TREATED WITH SPECIAL COATING. TWO-ARM DESIGN FOR SPACE-SAVING OPERATION. THE PULLING HOOKS SLIDING PARTS MUST ALWAYS SIT STABLY AND FULLY ON THE CROSS-BEAM. IF SEVERAL PARTS HAVE TO BE REMOVED ALWAYS FOLLOW A STEP-BY-STEP PROCESS. DO NOT REMOVE SEVERAL PARTS AT THE SAME TIME. THE PULLING HOOKS SUPPORT SURFACES MUST ALWAYS BE STRAIGHT AND SIT FULLY BENEATH THE PART TO BE REMOVED. DO NOT USE ANY ELECTRICAL OR PNEUMATIC SERVO SCREWDRIVERS OR HAMMER DRILLS. PROTECTIVE BLANKET REQUIRED. PROTECTIVE GOGGLES REQUIRED. UL STYLE""MARGIN-TOP0PX; PADDING-TOP 5PX; PADDING-BOTTOM 5PX;"" SPREAD USED INTERNAL 3 7/8 - 8 5/8 "" SPACE BELOW 3/16 "" SPACE NEXT TO IT (METRIC) 19MM SPACE NEXT TO IT 3/4 ""

Specifications

UNSPSC Code

40161700

Weight

6.7lb

Height

1.85in

Width

9.84in

Length

9.84in

Brand

No Brand

Call for price
Add to favorites list
Compare
Own Brand

Kukko Narrow 2-Arm Revers Quick Adj 5.5-Ton Capacity 6-3/8""(160mm) Open 5-7/8""(150mm) Reach

Category Pullers & Separators
B2688819
Own Brand

Kukko Narrow 2-Arm Revers Quick Adj 5.5-Ton Capacity 6-3/8""(160mm) Open 5-7/8""(150mm) Reach

Delivery 1-3 Days
Item Code: B2688819
Category Pullers & Separators
Manufacturer KUKKO QUALITY TOOLS INC

Description

FOR REMOVING BEARINGS GEARS DISCS ETC. FOR TIGHT OR DIFFICULT-TO-ACCESS SPACES. UL STYLE""MARGIN-TOP0PX; PADDING-TOP 5PX; PADDING-BOTTOM 5PX;"" THE THIN PULLING HOOKS ARE SUITABLE FOR NARROW DIFFICULT-TO-ACCESS LOCATIONS. A MANUAL ADJUSTMENT KNURL ALLOWS RAPID LOOSENING AND ADJUSTING OF THE EXTRACTOR JAWS ON THE CROSS-BEAM WITHOUT USING A WRENCH. CAN BE INSTALLED ON VARIOUS PULLING HOOKS AND VARIABLE REACH THANKS TO JAW EXTENSIONS. TURNING THE PULLING HOOKS ENABLES THEM TO BE USED BOTH INTERNALLY AND EXTERNALLY. SUITABLE FOR PULLING ASYMMETRIC WORKPIECES. SPINDLE HEAD BAND PREVENTS THE WRENCH FROM SLIPPING OFF. CROSS-BEAM WITH HEXAGONAL PROFILE FOR GOOD GRIP. ALMOST ALL COMPONENTS AVAILABLE AS REPLACEMENT PARTS TIME-SAVING ORDER PROCESS THANKS TO NUMBERING SYSTEM. NOTE PRESSURE PADS FROM SERIES 600-17 ARE A GOOD ADDITION IF THE SHAFT IS HOLLOW AND THE SPINDLE CANNOT BE SUPPORTED. STABILITY SUPPORT FROM OPTIONAL SERIES 219 CLAMP. THIN PULLING HOOK WITH QUICK ADJUSTING CAPABILITY QUICK ADJUST. PARALLEL PULLING HOOKS IN EVERY POSITION EVEN WITH FULL LOAD. PULLING HOOKS WITH INFINITELY VARIABLE ADJUSTMENT ON THE CROSS-BEAM. OPTIMAL ADJUSTMENT OF THE SPINDLE TO THE SHAFT WITH 2-SIDED SPINDLE TIP (BALL AND TIP). MECHANICAL PRESSURE SCREW. MILLED THREAD TREATED WITH SPECIAL COATING. TWO-ARM DESIGN FOR SPACE-SAVING OPERATION. THE PULLING HOOKS SLIDING PARTS MUST ALWAYS SIT STABLY AND FULLY ON THE CROSS-BEAM. IF SEVERAL PARTS HAVE TO BE REMOVED ALWAYS FOLLOW A STEP-BY-STEP PROCESS. DO NOT REMOVE SEVERAL PARTS AT THE SAME TIME. THE PULLING HOOKS SUPPORT SURFACES MUST ALWAYS BE STRAIGHT AND SIT FULLY BENEATH THE PART TO BE REMOVED. DO NOT USE ANY ELECTRICAL OR PNEUMATIC SERVO SCREWDRIVERS OR HAMMER DRILLS. PROTECTIVE BLANKET REQUIRED. PROTECTIVE GOGGLES REQUIRED. UL STYLE""MARGIN-TOP0PX; PADDING-TOP 5PX; PADDING-BOTTOM 5PX;"" SPREAD USED INTERNAL 3 7/8 - 8 5/8 "" SPACE BELOW 3/16 "" SPACE NEXT TO IT (METRIC) 19MM SPACE NEXT TO IT 3/4 ""

Specifications

UNSPSC Code

40161700

Weight

6.7lb

Height

1.85in

Width

9.84in

Length

9.84in

Brand

No Brand

Call for price
Add to favorites list
Compare
SEARCH ×